-
Mr davoodmaneshThe customers are quite satisfied with our products
-
Mr subhashThanks so much for your kindly help
-
Mr JosephCustomer get the goods
Smart Plug In Color Changing Led Rope Lights 2812B Ultra Bright Flexible Ribbon
IC Type | 2812B | IP Grade | IP20/IP65/IP67/IP68 |
---|---|---|---|
Leds/M | 30pcs | PCB Size | 10mm |
Voltage | DC12V | Power | 6W±20%/M |
Color | RGB-2812B | Package | 5m/roll |
Warranty | 2years | SMD Type | 5050 |
High Light | colored led light strips,led multi coloured strip lights |
Smart 5050smd Pixel Led Flexible Strip Light Full Rgb Pixel Led Strip 144 Leds/M Ws2812B
Product Features:
1. superb brightness 2835/5050/5730 SMD LED
2. Long life span 10,000 hours
3. Continuous length, packed with 5 meter.
4. Flexible ribbon for curving around bends.
5. Completely smooth and even light spread, solving the uneven luminous problem.
6. Ultra-bright but running at low temperature
7. Low power consumption.
LED type | 5050SMD |
IP grade | IP20/IP65/IP67/IP68 |
Leds/M | 30pcs |
PCB size | 10mm |
Voltage | DC12V |
Power | 6W±20%/M |
Color | RGB-2812B |
Package | antistatic and carton package |
Package | 5m/roll |
Warranty | 2years |
Application:
1).LED SMD flexible strip with high brightness, widely applied to hotel,KTV entertainment place for
interior decorative lighting,etc.
2). This LED strip could be linked up to 5M ,more than 5 meters is strictly prohibited.
3). The diameter of the power cord should be based on the actual maximum current , the product power
,cabling length(recommend no more than 5 meters),and the voltage of transmissionn line.
4). Each 5 meters need to add to the power cord. because of the voltage drop.
Extremely bright even in day light.
Long range focused beam allows you see far way or through the darks.
High efficiency and energy saving.
green environmental protection.
high light efficiency.
high safety coefficient.
long life.
protect vision.
market potential is tremendous.
How to install?
1. Cut along the mark line, tear a little bit 3M tape from the mark. If 3M tape is not peeled off a little, it will
be not easy to insert the strip into the connector.
2. Pull the black plastic lock out from the connector, insert strip.
3. Make sure the soldering pads fully touch the conjunction metal.
4. Push the plastic lock back towards the middle in the lock position.
5. Do not use to much strength while pulling the plastic lock, otherwise it can destroy the connector.
Use for indoor
Light up colorful home life ,DIY household lights for hallways, stairs, trails ,windows.
Light up colorful life hotels decoration use,Theaters, clubs, shopping malls, festivals and performances.
Use for outdoor
Architectural decorative lighting,Archway, canopy and bridge edge lighting, Security lighting and
Emergency.