Black 12V PCB RGBW LED Strip , 60LEDS / M 19W / M Addressable Waterproof Led Strips SMD5050

12V Black PCB RGBW LED Strip , 60LEDS / M 19W / M Addressable Waterproof Led Strips SMD5050

Features:

1. ultra thin FPC ,ultra - flexible, can be bent as you like, can be fixed at any irregular place.

2. 12V with 3leds can be cuttable and for 24v each 6 LEDS can be cut and connected as you like.

3. 3M adhesive tape on backside which can be easily to install also can be fixed at anywhere

4. DC12V with low voltage whican could be safe enough for installation.

5. Nonwaterproof with IP20 and IP65 can be used inside or outside IP 68 can be into water.

6. Certifications: RoHS and CE, can be exported all over the world.

Parameter:

Specification:

1. LED chip —— SMD5050 R, G, B, W(WW/CW) 4 in 1 LED chip.

2. Standard Reel Length: 5meter/roll, also can be customized.

3. Cutted: you can cut this stuff pretty easily with wire cutters, Solder to the 0.1'' copper pads and you're

good to go.

DC12V: cutted per 3LED, there are cut-lines every 5cm.DC24V: cutted per 6LED, there are cut-lines

every 10cm.

4. Power: the theory power is 19.2W/M, but the really power just about 12W/M.

5. Power supply:

DC12V led strip: you must use a 12V DC power supply to power this strip, do not use higher than 13V,

DC24V led strip: please use 24V DC power supply, or you can destroy the entire strip.

6. Sticky: non-waterproof: with 3M adhesive on back side for sticky;

waterproof: screw+silicon clip, or 3M adhesive back side.

8. Type: RGBW, RGBCW, RGBWW——60LEDs/m, White PCB

Waterproof——DC12V; Waterproof——DC24V

Non-waterproof ——DC12V; Non-waterproof——DC24V

9. Color temperature: RGBWW: RGB+3000K; RGBW: RGB+6000K; RGBCW: RGB+10000K

FAQ:

Q1: What are your market reach throughout the region?

A1: Our markets around the world in every corner, we have eight years of experience in foreign trade.

We have worked with every country buyers, producers and distributors to reach more than 19,000.

Q2: Can I get your samples first?

A2: Yes. Samples order is welcome.

However we will charge samples cost, which will be return in your mass order.

Q3: Do you have the ability to do independent research and development?

A3: Our engineering department has over 20 people, we have research and development capabilities.

We also collect regularly customers feedback, to improve products and make new product launches.

Q4: What is the lead time for production?

A4: 3-5 days for samples, 12-15 days for mass order.

Q5: How you control your product quality?

A5: 100% of the PRODUCTS will be tested and keep lighting to test its quality reliability,

each products should pass all our QC procedures before shipping to customers.

Q6: What type customer is your client?

A6: Hotel projects, wholesaler, export company, supermarket, retail chains On-line shop,

also personal home use.

Photo Show: